# 0.14.0

*August 23, 2022*

- Improve compiler support for CCRX and IAR
- Add timeout to `osal_queue_receive()`
- Add `tud_task_ext(timeout, in_isr)` as generic version of `tud_task()`. Same as `tuh_task_ext()`, `tuh_task()`
- Enable more warnings `-Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion`

## Add new examples

- `host/bare_api` to demonstrate generic (app-level) enumeration and endpoint transfer
- `dual/host_hid_to_device_cdc` to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller.

## Controller Driver (DCD & HCD)

- Enhance rhports management to better support dual roles

  - `CFG_TUD_ENABLED`/`CFG_TUH_ENABLED`, `CFG_TUD_MAX_SPEED`/`CFG_TUH_MAX_SPEED` can be used to replace `CFG_TUSB_RHPORT0_MODE`/`CFG_TUSB_RHPORT1_MODE`
  - `tud_init(rhport)`, `tuh_init(rhport)` can be used to init stack on specified roothub port (controller) instead of `tusb_init(void)`
- Add dcd/hcd port specific defines `TUP_` (stand for tinyusb port-specific)

### dwc2

- Update to support stm32 h72x, h73x with only 1 otg controller
- Fix overwrite with grstctl when disable endpoint

### EHCI

- Fix an issue with EHCI driver

### msp430

- Fix for possible bug in msp430-elf-gcc 9.3.0

### nrf5x

- Fix DMA access race condition using atomic function

### pic32

- Fix PIC32 sanity

### rp2040

- Add PICO-PIO-USB as controller (device/host) support for rp2040
- Use shared IRQ handlers, so user can also hook the USB IRQ
- Fix resumed signal not reported to device stack

### stm32fsdev

- Add support for stm32wb55

## Device Stack

- [Audio] Add support for feedback endpoint computation

  - New API `tud_audio_feedback_params_cb()`, `tud_audio_feedback_interval_isr()`.
  - Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported.
  - Fix nitfs (should be 3) in `TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR`
  - Fix typo in `audiod_rx_done_cb()`

- [DFU] Fix coexistence with other interfaces BTH, RNDIS
- [MSC] Fix inquiry response additional length field
- [Vendor] Improve write performance

## Host Stack

- Add new API `tuh_configure(rhport, cfg_id, cfg_param)` for dynamic port specific behavior configuration
- [HID] Open OUT endpoint if available
- [Hub] hub clear port and device interrupts

### [USBH] Major improvement

- Rework usbh control transfer with complete callback. New API `tuh_control_xfer()` though still only carry 1 usbh (no queueing) at a time.
- Add generic endpoint transfer with `tuh_edpt_open()`, `tuh_edpt_xfer()`. Require `CFG_TUH_API_EDPT_XFER=1`
- Support app-level enumeration with new APIs

  - `tuh_descriptor_get()`, `tuh_descriptor_get_device()`, `tuh_descriptor_get_configuration()`, `tuh_descriptor_get_hid_report()`
  - `tuh_descriptor_get_string()`, `tuh_descriptor_get_manufacturer_string()`, `tuh_descriptor_get_product_string()`, `tuh_descriptor_get_serial_string()`
  - Also add `_sync()` as sync/blocking version for above APIs

## Contributors

Thanks to everyone who contributed to this release: @alexandre-perrin, @ccrome, @cr1901, @Daft-Freak, @Firefishy, @hathach, @iabdalkader, @Iktek, @kasjer, @kilograham, @liamfraser, @M3gaFr3ak, @maddyaby, @majbthrd, @mingpepe, @Nikitarc, @perigoso, @phryniszak, @pigrew, @Qianhao2579, @robert-hh, @Ryzee119, @sjanc, @sknebel, @tannewt, @tfx2001, @Wini-Buh, @yoyopod.